Cultural Autobiography Essay

My name is Hanan Hassan, and I was born in September 21, 1992 in Jeddah, Saudi Arabia. I am the eldest of nine children that consist of four girls including me and five boys. To most people I am an ordinary twenty- one year old who works and goes to school, but what most people don’t know is that I’m basically the second mother of my household. Even though my mother is alive and well, I was taught at a young age to take responsibility and to be responsible like an adult. Not only do I take care of my siblings, but I cook and clean and do everything my mother does, because I was raised to do those things easily without complain. Anyone who isn’t part of my family/friends would look at my life and think I have no freedom. But the way I was raised taught me to be an adult, yet act my age. When I look back at the past years, I was raised in three different cultures. My whole life consists of being raised in three different cultures, but most importantly, the culture I was born into is the one that I identify with the most. I say that because that’s who I am, and I am a Somali native. Although I have a different nationally, my ethnicity is who I am. Mostly, people nowadays cannot differentiate between the two. My nationality is where I was born in, and my ethnicity is who I am. As a child I struggled with both. I grew up in a town full of Arabs, and the only Somalians I actually interacted with were my family. In any event, if you don’t know much about your identity, you go into this crisis mode. Until I came to America, all I knew was that I was a Muslim and Somalian. There’s this need to know who you are, and where you come from, and every day you learn something new about your identity. When I came to America, there was a huge culture shock. For instance religiously, I grew up in countries where there was a mosque in every couple of blocks, and here the opposite were churches. Everywhere I looked was a church. It was a complete different atmosphere. In the Muslim countries, when it was time for prayer, you would be able to hear the entire mosques at once calling everyone to pray. And it was very weird not being able to hear the call for prayer time. But as month and years passed, I’ve gotten used to not hearing that. Not only was not hearing the call to prayer different, but holidays didn’t have the same effect as they used to. In the United States, when it’s turns winter, the festivities of the holidays begin. I don’t even  celebrate Christmas, but when everywhere you look at is lit up for Christmas, you feel part of a community. Since everyone around you is celebrating all these holidays, you feel as though you’re part of it. Whenever Eid comes around, it doesn’t feel the same way as it did as to when I was a child. For instance, when it was Ramadan time in Saudi Arabia, everyone used to get together to have big feasts. People would always stay up late and wait for the call of prayer, so that everyone can start fasting again. Also, shops would close early when it was time to eat. Families and friends would celebra te the whole month together, and go to the mosque together. Not only was everyone up, the whole city would be decorated and children would get gifts and monies from the elders, and it was just a beautiful time to be a kid. When you compare the American culture and the ones I grew up in as a child, they are completely different. The way we dress here, eat, family, religion, and everything else is different. For instance, in Saudi Arabia, the culture there is for women to cover up. Women are covered from head to toe. Majority of it is because the Saudi culture is influenced by religion, whereas in America everything is by choice. Our women in America have the choice to cover or not, and in Saudi Arabia, if women are not covered, there are consequences to pay. As child, I was able to wear whatever I wanted, because I was not a woman yet. I remember women not being able to drive, just for the fact that they’re women. Men were able to do anything they wanted, whereas women mostly stayed home. Mostly, women stayed home and took care of the family members. They did all the cleaning and cooking, whereas the man went to work and did all of the outside work. Not only did women stay home, they were also no t allowed to drive, which was a culture shock when I saw women driving in America and Egypt. I never really understood as to why women couldn’t drive a car, but it was illegal for them to do that. Women don’t have much say there, because the Saudi government uses religion as an excuse to minimize all of the rights women have. They say a woman shouldn’t drive, because her husband should be able to take her to wherever she pleases, but reality is no one is willing to do that. Additionally the problem wasn’t just the covering part; the problem was women’s rights being oppressed. And when you’ve lived in an environment like that it’s hard to get used to a new culture that established freedom among every individual. In addition, the cultures I was raised in required  me to cover up and to respect myself and the others around me. Both of my cultures are two cultures that heavily rely on religion. Sometimes it’s hard to separate what the religion requires and what your culture requires. Although, now some think both are one in the same, but people interpret each one differently. In other words, people put religion and culture in the same category. For example, my family is very conservative. Both of my parents come from strict families who take religion very seriously. Back in the 1980s and 1990s, religion was starting to develop in Somalia. When my mother was thirteen years old, people used to wear thin materials that practically show cased their whole body. And my grandmother used to have her hair out in an afro as wells as wearing pants. At that time, people didn’t criticize women for hanging out with their male friends. It was not a big deal in the culture. For this project I interviewed my mother, who as I got older, helped me learn more about my culture. Whenever my mother would tell me stories of her teen years, I would always complain about why she was so judgmental of how I dressed. In the interview, she explained to me that people didn’t know much about religion back when my grandmother was young. So there weren’t that many rules to enforce upon them, unlike us who are very much educated about religion. As my mother continued and talked more about our culture, I realized that my culture is influenced a lot by religion, but that doesn’t necessarily mean that every aspect about the culture comes from religion. Similarly, the school I went to, my neighbors, and everything that surrounded me consisted of religion. For instance, during the weekdays I went to school, and during the weekends I went to another school that was a religious study. Other than the American culture, the thing that ties a lot of people to their culture is religion, because I’ve learned over the years that a lot of cultures are strict because they mix their religion and culture together; so that it becomes easier for them to handle. Above all, when I came to America, I quickly learned to maneuver between the culture I was raised in and the culture that surrounded me. I’ve learned to manage between both, so that I don’t forget my roots, yet still manage to stay in the one I came into. It’s tough maintaining between both, because they’re both so completely different. In the American culture, I learned to be independent and to voice my opinions, so that I can live the life I want. In contrast, in my culture, I wouldn’t be able to voice out my  opinion so easily and openly. In essence, looking back in my life, I realized that the cultures I was raised in have shaped my life and made me the person I am today. Although there are many things that I personally don’t agree with in each culture, at the end there the reason I have grown into the open mined human being I am. Each culture has its positives and negatives. In the Saudi culture, I learned responsibility at a young age, but it was a lesson well learned, because you don’t see a lot of twenty- one year olds who are so aware of their life and the choices they make. Moreover, I learned that being multicultural teaches you and gives you the opportunity to look at life differently. Most people grow up in one culture, and they only have the views they’re presented to them. But moving around, taught me that there are other ways to look at this world. Every culture has an opinion on how this world should function, and being able to represent few cultures gives me the opportunity to voice out an opinion that has some background roots to it. I not only represent the culture I was born into, but I represent that ones I was raised into. I’m not only multicultural educated, but I’m also multilingual. Being raised and exploring other cultures also gave me the chance to speak more than one language. In addition, I speak three languages: Arabic, English, and Somali. Over the years, I’ve struggled with figuring out who I am, because unlike everyone else I didn’t grow up in one place. That may seem like a downside, but I gained values and lessons that I can carry throughout my life. I gained cultural experience between the cultures, and I gained religious knowledge, and lastly I gained how to communicate with individuals outside my culture. With all of that, I gained the knowledge of knowing who I am, and where I’m from. We don’t know how tied where are to our roots and ethnicities until you learn to explore other cultures around you. There are people around us that are so close minded of the world, and what it offers that they continue to purse being ignorant of others around them. If we pursue our surrounding and environments, we begin to go on a road full of fulfillment that leads to discovering more about our inner selves.

Political Theory Essay

Envy Test—The theory that the division of resources is actually equal if and only if one person does not prefer someone else’s portion of the wealth to his own. That means that if everyone in society is ahppy with what they have as compared to what everyone else has then the society passes the envy test. This has never happened and seems contrary to human nature. The further fallacy is that it could ever be achieved in that some people are born with innate talents that cannot be changed to give them fewer resources. Unremunerated rights—Proponents of this political theory argue that the Bill of Rights was not intended as a list of all the rights a person should be guaranteed under the Constitution. They argue that rights not listed, for instance the right to privacy, still exist. This theory was first put forth by the Warren Court in arguing that people had a right to privacy. It is also frequently used in the abortion rights debate as a justification for a woman’s right to control her own body. Politics of recognition—this is the political theory that argues we can only achieve enlightenment and equality when we recognize that people are not homogenous and acknowledge the inherent differences among people. This is almost the exact opposite of politics of equality which claim that all people have the same basic needs, wants and desires and should be treated all the same. Civic engagement—is the term used to define a person’s involvement in the social and political causes of the world around them. In psychology, it used primarily to describe how involved a person is in social causes—volunteering at a soup kitchen, etc. In political science terms, it is used to define how involved a person is in the participatory aspects of government—do they just vote, take an active role in campaigns, support certain candidates, etc. Black consciousness—primarily used in relation to South African politics, this is the theory than being black is more than a skin color and represents the way the minority chooses to act toward itself and toward others. The movement argues that blacks in South Africa exploit each other more than whites exploit each other and that part of the problem is a culturally defined set of values and attributes that they have accepted about themselves. The movement calls for blacks to band together to change the way they treat themselves and to change the way they are treated by the remainder of society. Veil of ignorance—this is the theory that citizens are deliberately kept in the dark about the actual effects of certain legislation. In 1971, philosopher John Rawls argued that social justice requires that people be blind to the way something will impact them in particular and look instead to how it affects society as whole. In recent years, the argument has been made the special interest groups have lifted the veil of ignorance making everyone consider how legislation affects them personally. Universal citizenship—the goal of universal citizenship is to eliminate all barriers to participation in the political process. Thus, under a proposal for it in the European Union, even children would have the right to vote, though this would be carried out by their parents until they reached a certain age either 16 or 18. It assumes that everyone should have an equal right to participate in the political process. Anthropocentrism—is the process of viewing things from a solely human perspective and the word is usually used in a derogatory sense implying that by being so self-absorbed in the wants, needs and desires of humanity we may be ignoring the needs of another equally important species. This is completely in opposition to the concepts of survival of the fittest and to the victor goes the spoils. According to Dworkin, Adrian (the gardener) owes nothing to Bruce (the tennis player), as a matter of justice. Although they will have unequal goods, this is not unjust. However, Adrian might owe something to Claude (the unsuccessful gardener), and Adrian’s descendents may owe something to Bruce’s descendents. Why? In your answer, be sure to identify and apply Dworkin’s theory of distributive justice. In Dworkin’s theory of distributive justice, the beginnings are the all important state as is their impact on the end.   In this scenario, the statement that Adrian owes nothing to Bruce implies that they began life with equal resources or that Bruce began life with greater resources. It does not discuss whether Bruce might owe something to Adrian. Likewise, by saying that Adrian might owe something to Claude, who is unemployed, it implies that Claude and Adrian have equal resources and equal talents, but that Adrian has been successful where Claude has not. Furthermore, by saying that Adrian’s descendants might owe something to Bruce’s descendents the question implies that those descendants might have unequal beginning resources and ending statuses. The key to Dworkin’s distribution of wealth theory is that equal resource means equality. Therefore, if both Adrian and Bruce have the same basic resources—family, education, etc.—then they have met the initial requirement for equality. However, when a situation develops so that Adrian envies the things that Bruce has, the equality is gone. The problem with Dworkin’s theory is that it fails to address the impact of talents in the equation and also fails to address non-financial aspects of the envy test. For example, if Adrian and Bruce are able to achieve equal financial success with their respective professions, they should be equal under the envy test, but if Adrian believes (accurately or not) that Bruce has a more glamorous life with less work, more access to fame, etc., then the situation may still fail the envy test. This example perfectly demonstrates the flaws in the envy test and in Dworkin’s theory. Regardless of the flaws, Dworkin’s theory has been largely employed and thus the other caveats of the question.   The way that Dworkin’s theory has been employed, it is accepted as a given that Claude, who is unemployed, will be envious of Adrian and therefore they will be unequal. To even out this inequality, the government application of the theory has been to take resources (in the form of taxes) from Adrian and give them to Claude. The problem with this solution is that it can create envy in the opposite direction. To make them equal, you would have to remove half of what Adrian has and give it to Claude so that he would not be envious of Adrian. Then, the two would have equal resources.   Then, however, Adrian is likely to be jealous of Claude who has all the same things that Adrain does but who has not had to work for them; he will envy Claude’s lifestyle. Ultimately, much of the bashing done about the distribution of wealth system comes down to just that—another form of envy. The liberal view of universal citizenship has been challenged by feminists and advocates for race-based identity politics. What is this view, what about it has been challenged, and what is it alleged to be missing? In your answer, discuss the theories of Young/MacKinnon and Fanon/Biko. The problem with the liberal view of universal citizenship is that it requires as basis equality. If all people were equal, had always been equal, and would always been equal, then the concept of universal citizenship would be not only valid, but the appropriate thing to promote. However, the reason that it is widely-challenged by feminists and advocated for race-based identity politics is that at no point in human history have individuals ever been treated as true equals. MacKinnon and other feminists argue that it is more likely that without identifiable and motivate sub-groups of voters, the system will default o maintaining the status quo and will as a consequence promote dominance by white male society. Fanon’s argument is similar though not exactly the same. He argues that to appreciate the value of citizenship, one must have been involved in a violent struggle to attain it. This is sort of revolutionary politics at heart. It assumes that people do not value rights that they are given so much as those that they fight for. The basic premised is that in fighting, through violent struggle to attain citizenship and later the rights conveyed with citizenship, the African-American (and to a lesser extent other racial groups) has gained a self-identity that would be lost if they had been granted universal citizenship. It is possible that the opposition to universal citizenship comes from our ingrained belief in traditional political theory as developed by dead white men who placed huge limitations on citizenship including social class, race, gender, age, land ownership and literacy as well as other requirements through the ages. It should also be considered whether, despite their high-minded motivations, feminists and others who have been granted citizenship and the rights therein are not opposing universal citizenship in their own out-moded version of us versus the other. As they are no longer a distinctive portion of the other, it is possible that they desire to continue to bestow that status on different individuals including recent immigrants and children. Conservative opponents to universal citizenship say that the concept eliminates concepts of national allegiance and even racial allegiance, leading to a homogony of people that destroys diversification and eliminates cultural differences. While some proponents would say that is exactly the point, opponents point out that assimilation of all different ideas into one mainstream is counterproductive and eliminates the desire for and will to change. Kymlicka claims that all approaches to contemporary political theory endorse the proposition that all persons should be treated as equals, and that their disagreement comes down to the practical question of what that entails. What must be done to treat all persons as equals, according to libertarianism, liberal equality, utilitarianism, feminism, and Marxism? According to libertarian philosophy, equality happens when people do not use force against one another and people are given all rights which do not impose on the rights of others. This is the ultimate culmination of the Wiccan creed of â€Å"It harm none, do what though wilt.†   Libertarians believe in the defensive use of force to protect what is yours, but are staunchly opposed to the use of aggressive force. Aggressive force can never be used to promote equality. Those who argue for liberal equality believe that it is the opportunity matters. If people are given an equal chance at success, then the system has been successful according to those who support liberal equality. Utilitarians believe that people are equal when the common good is enacted for the rights of all people and that the common good applies equally to all members of society. Proponents of this theory argue that good is the important motivator and if all the actions are taken in a strict moral and ethical stance for the good of all people then the actions are inherently equal. Feminism comes in two distinctive branches: one simply promoted that after years of oppression a woman is equal to a man and can therefore do anything he can do. In an extreme form of feminism, some believe that the woman’s capability of imbuing life and her propensity for compassion make her superior to the male of the species.   The problem in extreme forms of feminism is that they also believe women should be given more than equal opportunities in an effort to make up for the centuries of oppression by men and that men should be denigrated to the class of secondary citizens.  Ã‚   Marxist theory claims that men are unequal in their talents and abilities, but that one talent or ability should not be more highly valued than another—thus a person whose talent is in digging ditches should be as valued as a person whose talent is neurosurgery. Are equal rights sufficient for realizing justice? Why or why not? In your answer, consider and discuss those theories of justice that find equal rights sufficient as well as those that do not. Equal rights are not sufficient for justice. There must also be an equal application of those rights. For instance, if a black man and a white man are accused of a crime, both have an equal right under the law to a jury of their peers, but depending on the racial makeup of the jury selection pool, they may not have an equal opportunity for the enforcement of those rights. A black man may find himself facing a just or only white Americans and vice versa.   Likewise, technically a rich man and a poor man have the same right counsel if accused of a crime, but the reality of access tells us that the rich man will likely hire an independent lawyer and will be less likely to serve time for his crime.

Happiness in China

Introduction This paper mainly focuses on Chinese happiness index and its influencing factors analysis. There are many things we are eager to get, such as freedom, money, promising job, reputation, etc. However, we do not pursuit these things themselves, what we want is the improvement of happiness. Those things have value only when they directly or indirectly promote the feeling of happiness. Gross national happiness (GNH) is an indicator that measures quality of life or social development in a scientific term. In the 1970s, the king of Bhutan proposed the concept of Gross National Happiness.He believed that government should aim to create happiness. The national happiness index should be improved including the factors both in the material and in the spiritual. The GNH index identifies four aspect of national happiness development: good governance, economic growth, cultural development and environmental protection (Hu, 2011). With the rapid development in China, the government takes the index to measure the national happiness. However, there is no exact quantitative definition about how many factors influence the GNH.The paper therefore will analyze the factors that impact China’s gross national happiness from social, economic and politic perspective. Social Factors The education system Education in China does not focus on the students’ practical ability and interests in studying. These schools focus on students’ test scores instead of the students’ potential. Teachers desire to have the top students rather than â€Å"bad students†. A student’s scores represent his or her personality. From elementary to high school, students have no elective courses. The teachers’ task is to teach students how to get high scores on the exams.The students are over stressed. They go to school about 6 o’clock in the morning, they stay up studying at night (Hu, 2011). It is impossible to become relax under such pressure. If s tudents want to be admitted to top universities, they have to study hard. Studying is the only thing they need to do. The universities just require students’ outstanding scores from the college entrance exam. Therefore, a special group of students called returning students who re-attend classes after failing the college entrance exam. Many students re-attend high schools classes year after year until hey are admitted to a top university (Hu, 2011). The only scale to measure one's capacity is the diploma. Furthermore, students would prepare the postgraduate examination in order to find a better job. From elementary to the college, students care for nothing except studying. The situation leads to a decreasing unhappiness index for China’s student and their parents (Hu, 2011). Quality of marriage In China, marriage is based on one's family background, which is a significant factor that affects many couples of all ages. Even in modern times, a great number of young people in China will obey family arrangement.Oftentimes, if one's family live in poor conditions, the party will be rejected by the other party’s family with an excuse ( Luo, 2009). Even in marriage, the couples have to struggle for their future, such as house, car, money. If the couple fails, they may divorce each other. Sometimes, the marriage may only be decided by the money not affection. This is the reason that the Chinese couple have a low happiness index in marriage( Luo, 2009). Social security system China’s social security system is not perfect and in the process of reformation. What is worse, the aging of society is the new pressure added on society security system.China’s population continues to grow. The expert predicted the total population will reach 1. 5 billion by the middle of the 21th century, and the elderly population will exceed 300 million. Due to the one-child policy, the common families have only one child. As a result, the number of retirees wi ll continue to work to reduce the burden on their family (Hu, 2011). Furthermore, the ensure pension and medical insurance system is still incomplete in China. The members of family save money for the older family member not for traveling or entertaining. If someone is sick in family, it could make the whole family in dilemma (Hu, 2011).These situations place a heavy burden on younger generations. The young people have the responsibility to take care of the parents and to rise the next generation. The problem also increases the unhappiness index for Chinese life. There are so many social factors that influence the Chinese happiness index. China’s government should take measures to provide the people a higher quality environment for life to increase happiness index. Economic Factors The price of commodities In China, the price of commodities has risen significantly. It has gone beyond the income level of many common people.Housing price, especially, has gone too high in recent years (Orlik, 2013). Many people in China make every effort to earn money to buy a house. They work day and night. They give up the opportunity to travel. They dare not to have dinners in restaurants. They consider that whether they should buy clothes or not. All efforts are made to buy a house. Especially, people who borrow money from the banks are under a lot of pressure for repayment. Their mortgage payments are most part of their monthly salary so they do not have enough money to spend on other things.Even if they are not satisfied with the current work, they dare not to resign. Due to high housing prices, many people have become slaves to their houses and live under tremendous pressure in all aspects. To their surprise, the prices of houses have become much higher! It is awkward that a common person cannot afford a common house in China (Orlik, 2013). There is no doubt that the high commodities price is not good for the physical and mental health of the people. In order to hav e better living, the people pay the high cost.This situation is not beneficial for the improvement of happiness index in China (Orlik, 2013). Income Inequality China has great economic growth in the past few decades. However, the average incomes are higher in urban areas than in rural areas. The phenomenon of income inequality is obvious in China(Finance and economics,2012). The income of the famers is mainly depended on the land, but the agricultural output is limited. They cannot become rich just by a few acres of land. A lot of rural residents abandoned their land and go into cites with nothing, these peasants are called migrant laborers.They can do are limited occupation due to the lack of professional skill. Women worked in labor-intensive goods and services with the minimum wages. Men worked as builders risking their lives. More badly, they may not be paid after the work is finished. Even through migrant laborers live in the same city with urban residents, their living conditi ons are totally different(Finance and economics,2012). The inequality income make the labors live in the bottom in the cities. However, migrant laborers still do not want to go home due to the worse living condition.These situations make migrant laborers have low happiness index(Finance and economics,2012). Opportunity of job The imbalance of employment between supply and demand exists in China. China is in the peak of the population, there are a lot of workers need jobs. For the rural laborers, they would like to go to urban for better life environment. The urban has an increasing pressure on employment because the surplus rural laborers move to urban. The rapid growth of new workers is far more than the growth of job creation. The situation is also confronted by the college graduates.The continuous development of Chinese higher education has produced hundreds and thousands of college graduates annually. Unemployed college graduates become a common phenomenon (Economy Watch, 2010). The unemployment problem influences the happiness index on Chinese people. More badly, it could lead to the social unstability. To solve this social problem, the government should make efforts for better employ environment (Economy Watch, 2010). Political factors Democracy Democracy is defined as the rule that manages state affairs according to the principle of equality, the minority is subordinate to the majority.The United States and European countries have very mature democracy. However, China is a developing country,much of the system is not perfect and it does not achieve a complete democracy. (Pei, 2013) In western countries, the separation of the powers is a political doctrine. It is divided into executive power, judicial power and legislative power. Even if the president commits crime, judicial independence can prosecute his action. For example, the former president of Taiwan who broke the law, an independent judiciary made trial for him (Kelly, 2013).While China implements the system of people's congress and the Communist Party commands all the system, it produces the law privileges. They use the privilege to corrupt and the subordinate officials provide shelter for them. Furthermore, the phenomenon of bribery is very severe. Clerks pay bribes to get the ideal position. These situations result in people low happiness index (China daily, 2010). Freedom The political freedom involves many aspects including freedom of speech, freedom of assemble and freedom of vote and so on. These freedoms can regard as the sign of human right.The political freedom should be treated as the ultimate goal of Chinese political reform and development. Freedom of speech is the political right to communicate one's opinions and ideas. While Chinese people almost have no rights, the speech against party or government is prohibited by the reality of media and the internet; Freedom of assembly is the individual right to come together and collectively express, promote, pursue and defend common interests. Due to the rule of one-party monopoly, the Communist Party of China do not allow to make other the parties or groups.In this way, the power is not restricted. The individual without organization’s management have no power to oppose it; Freedom of vote refer to every citizen has the freedom right to vote for a leader. As long as you have ability and ambitions, everyone has the opportunity to be leader. The candidates can introduce policies to get votes so that people will benefit. Unlike China, official is appointed behind the relationship or money (political right and freedom, 2013) The system of organization in China leads to those problems, which is the reason that the Chinese have less political freedom.The government should try to implement the multiple party coexist structure so that Chinese people can have real freedom. People could have a high happiness index in China. Equality The equality is a social state in which all people within a specif ic society have the same status in certain respects. The social equality includes equal rights under the law, such as security, voting rights, property rights, and equal access to education, health care and other social securities. It also includes equal opportunities and obligations. (Gay, 2013) In China, all kind of reasons cause to the inequality in many aspects.Such as, there are inequality relationships between superior and subordinate in official circle because of the lack of the voting system. It has the inequality of education distribution because the imbalance development of district economic. These situations lead to a decreasing unhappiness index in China’s community. Conclusion Based on the researches, this paper mainly carried on a study in Chinese happiness index via analyzing the influenced factors. The social, economic and politic factors were considered as the factors that have great influence on happiness index.In support of the basic result, this paper unde rtook a systematic analysis from these aspects. Ultimately, there is conclusion that all kinds of factors have a significant impact on happiness. Furthermore, considering the actual situation in China, the majority of population are middle and lower income workers, farmers, and unemployed. Their living standard determines the overall level of happiness in society. Therefore, it is very urgent and important to design proper policies to enhance these people’s happiness level. Several policy recommendations are put forward to the government to increase the citizen’s happiness index.First, it could be suggested to build a sound social system. The government should remain a primary priority to make Chinese residents get better education and satisfy their needs. And building a social security system protects the middle and lower income residents. In addition, the government should guide sustainable and stable development of economics. It is important to regulate wealth gap b etween rich and poor and control the excessive imbalance of income distribution. The government should also adjust economic structure and improve the demand capacity for labor to reduce unemployment.Finally, the politic factors have the lowest feeling of happiness in society. The government can reform and establish multi-party democratic constitutional system instead of one-party monopoly in china. The rights, free press, freedom of assembly and open elections, is the basic need of human beings for high happiness (Hu, 2012). Because of the constraint of time, this paper ignored some other factors when doing research. Furthermore, many countries have a higher level of happiness, such as some Nordic countries. We can compare Chinese economical, social and political data with those countries.Through comparison, we can detect some deeper reasons to guide our new research. References Centre For Bhutan Studies. (2013). Bhutan GNH index. Retrieved from http://www. grossnationalhappiness. c om/articles/ CSR. (1998, October). The development research center of the state council of the People’s Republic of China. Retrieved from http://www. chinacsrmap. org/Org_Show_EN. asp? ID=133 China Daily. (2010, February). Retrieved from http://www. chinadaily. com. cn/china/2010npc/2010-02/09/content_9449872. htm Finance and economics. (2012). A new survey illuminates the extent of Chinese income inequality.Retrieved from http://www. economist. com/news/finance-and-economics/21568423-new-survey-illuminates-extent-chinese-income-inequality-each-not Gay, M. (2013). Equality center. Retrieved from http://www. hrc. org/the-hrc-story/equality-center Hu, A. (2011, February 24). China must measure happiness. Retrieved form http://www. chinadialogue. net/article/show/single/en/4130–China-must-measure-happiness- Hu,Z. (2012). Chinese Happiness index and its influencing factors analysis. Retrieved from https://docs. google. com/viewer? a=v&q=cache:87W_oHEJOfMJ:kth. diva-portal. rg/smash/get/diva2:517428/FULLTEXT01+Chinese+Happiness+Index+and+Its+Influencing+Factors+Analysis&hl=zh-CN&gl=us&pid=bl&srcid=ADGEEShbzAfX43ywu53VUiBsILTQM_2xIECL1yhLg0dKRhYpo8cyrWY_1dE6DcH4MqqAvZDp-CbZjTIuhHTZOZq2NjNO19gljUbgNwzp1GqoKkG7V4Fw58wu-95VtfDDqgpP6u2-9A5E&sig=AHIEtbRIrzxH_PxOcD30dRfTyXFbz4oftg Kelly, M. (2013). Separate of powers. Retrieved from http://americanhistory. about. com/od/usconstitution/g/sep_of_powers. htm Luo, A. (2009, November 5). The differences between Western marriage and Chinese marriage i learnt. Retrieved from http://www. gzstuff. om/profiles/blogs/the-differences-between Orlik, T. (2013, January 16). Hope for home buyers in China. Retrieved form http://online. wsj. com/article/SB10001424127887324235104578242043338468974. html Political right and freedom. (2013). Retrieve from http://baike. baidu. com/view/512465. htm Pei, M. (2013, February 13). 5 ways China could become a democracy. Retrieved fromhttp://thediplomat. com/2013/02/13/5-ways-china-coul d-become-a-democracy/ Spiiker education group. (2012). High housing prices in China. Retrieved from http://www. spiiker. com/intensivereading-detail/intensivereading/24832789. html

Obaid Al Slamis Career Assignment Example | Topics and Well Written Essays - 1750 words

Obaid Al Slamis Career - Assignment Example Mr. Slami has a complete career in the banking sector and he started off as an assistant general manager. In the initial years of his career, he was a bit confused and sidetracked about the type of job to do in order to focus on one career. This can be inferred from the fact that first, he started off as a part-time as an assistant manager and then he changed his line to teaching accounting for about a good three years. This can also be stated as a positive aspect that the individual had a deep insight about the technical know-how through his experience as a part-time. The second added benefit is that he also had a good amount of knowledge about the facts and figures pertaining to the area of accounting through his teaching career. Mr. Slami is also somebody who has a pretty good knowledge of how different types of banks function because throughout his career he switched to many various types of banks. He has the experience of about three different banks. He has even worked as an auditor and finally ended up being the General Manager in an investment bank. Career development is a complete procedure of how an individual takes up a different variety of tasks, and roles to develop a set line of skills and experience. A career in terms of jobs is committing, yourself to a role physically and emotionally for a certain period of time. This time period is helpful in gaining an insight of the tasks carried out at a particular job and human developmental training. For this purpose, it is highly essential that the individual is focused, carrier oriented and be moving towards a level of self-actualization. The person mentioned in the resume takes the career as a structured pattern of activities that tend to create a path in one direction focused on one field of interest.  

Occupy Wall Street Movement Assignment Example | Topics and Well Written Essays - 1500 words - 1

Occupy Wall Street Movement - Assignment Example As the discussion outlines  the main motto behind this movement was to invoke change in today’s crony capitalism by raising worldwide awareness and calling themselves as 99%. They claimed to use the tactics of Arab Spring that was to peacefully protest against the unjust. An admirer of the OWS released a video calling the youth to join the protest by gathering at lower Manhattan and occupying the Wall Street for some moths. From there other groups including the governing body, General Assembly of NYC also started joining the protest. The word of protest soon got out through the social networking sites like Twitter and Facebook. The movement soon started gaining momentum and pick up steam within a month.This paper discusses that  the protest that started on the Wall Street did not put forward any demand or grievances instead it brought some agendas to be viewed. The common agenda was the gap of 1% and 99% where 1% was considered to be the â€Å"wealthy traders and bankers at the top of the financial services sector† and the 99% was regarded to be everyone else leaving the 1% including the demonstrators or the protesters. The 1% was regarded to have a lump sum amount of money, power and wealth and was interested in conflicting with â€Å"the economic well-being of the rest of the country†.  The excessive compensation paid to the Wall Street traders aggravated income inequality and promoted excessive risk-taking. On the other hand this penalized the taxpayers whose money has gone into bailing out the failed banks.

A French Bakery Chain Case Study Example | Topics and Well Written Essays - 1500 words

A French Bakery Chain - Case Study Example They strongly believed that acquisition would help them maintain steady advantage without incurring extra cost on the expansion of business on a stand-alone basis. The LPB stores had decentralized working and functioned as stand-alone stores which it easy for the Fields to amalgamate the administration within its core functioning process. It was for this reason that merely after a month of acquiring LPB, Fields reduced the subsidiary administrative staff from 53 to three. Many of their functions like accounting, finance, human resource, training etc. were merged with that of the Fields’ company that resulted in redundancy of jobs in LPB. The main reason for the action was that Mrs. fields Cookies followed mechanistic approach and heavily used technology within its administrative process to streamline sales and production. While Fields appreciated empowerment of its managers and workforce, they also used technology extensively in their production processes to predict and improve sales. The huge hierarchy of employees in LPB was therefore not suitable for the efficient delivery of Fields’ goals and daily targets. Hence, they could o nly retain two persons in operations and one from their R&D section. As LPB Manager, I believe that the strategy of Fields is not right. LPB has gained considerable credibility in the area of baked products, coffee, and sandwich. The huge size of LPB was a significant factor that had prompted Fields to acquire it. The LPB products and services could offer the huge scope of expansion of interests of Fields as they had already created a niche market for their cookies. The acquisition had provided them with the opportunity to introduce their specialty cookies in the European market. The combination outlet could serve as a major facilitating platform for their business with a wide scope of opportunities for improved revenues. In such a scenario of a win-win situation, the redundancy was neither necessary nor morally correct decision.  

Communications strategy Essay Example | Topics and Well Written Essays - 2500 words

Communications strategy - Essay Example There is the need to highlight the communication measure applied to maintain the market share witnessed over the century and ensure a customer retention and satisfaction as compared to competitors. With variable communication channels developed in the society, including the social networking system, the presentation to deliver an informed clientele would ensure Thomas Pink remains favourable in the UK market. This paper analyzes the fundamental communication channels that have been developed by Thomas Pink to retain and find new customers, who are more informed on their products. Introduction The UK market is growing increasingly in favour of new commodities. The favour has been subjected on the marketers’ ability to apply a communication measure that would adopt the best strategy to communicate to the majority of the clients. The uses of traditional methods have been replaced by the growing technologically advanced systems. The increasing UK market has adopted communication m eans like the social networking systems that are incorporated in the completion of daily activities. Thomas Pink has been one company that has showed their ability to favour progress as they apply modernized operation trends, to maintain a high quality service. Communication is a measure used to relay messages and share methods needed to attain progress as the company ensures the mission and objectives are met. Although the traditional communication channels had been tested to be successful, Thomas Pink has adopted contemporary communication channels to lead to the goal achievement and progress. Company Background The company witnesses the history from the works of Mr Pink, an 18th century designer who tailored a remarkable hunting coat (Synovate Retail Performance, 2008). The pink coat’s design had been unique and involved intricate designs that promised the birth of the famous company, to be witnessed in the modern day century. Thomas Pink’s foundation in the creatio n of the company in 1984 grew to be recognised as part of Moet Hennessy-Luis Vuilton (LVMH) group (Synovate Retail Performance, 2008). The provision to join LVMH had been initiated in 1999 when they had bought an outstanding portion in the business. Thomas pin has since grown to emerge as a leading retail clothing store in the UK and Ireland with stores amounting to over 20 outlets. The company has ever since emerged as an outstanding British company identified through the shirt making tradition with the quality luxurious brand. The British company has gained international growth in establishing outlets in Paris and famous US cities. The most outstanding reports of the growth recorded have been in 16.5 billion turnovers with the recruitment of a record employee number of 71,000 (Synovate Retail Performance, 2008). The company has included famous brands in their stock including Zenith, Krug, Hennessy and other recognized brands. The company stocks affordable attire from shirt, tie an d accessories and finds concrete establishment in the UK. The retail shops are located from London to New York in Madison Avenue where the brand has been established as a leading retail shirt shop. The other provision established by the company had been in the set up of an exclusive women’s store Pink Woman located in Sloane St. Knightsbridge (Synovate Retail Performance, 2008). The reputation of the retail outlet has been boosted in the exemplary fabric choice and

Business Intelligence Report (BIR) about the company's management Essay

Business Intelligence Report (BIR) about the company's management practices - Intorduction and Conclusion - Essay Example Whole Food Market had been experiencing heavy rise in profits since Jan 2001. The hard work of its team members and strong leadership at the helm of affairs helped the company prosper. Whole Foods products include only natural and organic products. These products include everything from produce, bakery items, cheese, coffee, meat, seafood, body products, supplements, wine, floral, house hold cleaning products and pet products. Their marketing is being taken care by a team of 45 proficient marketers and the employee pool is a rich in expertise and a diverse pool. All in all, Whole food has a solid ensemble in all areas of its management. Organization Structure 2. Organizational Structure The Organizational Structure section can include a chart but should include an explanation of the company's organizational structure and how that impacts the company's performance. Whole Foods Market depends on organizational structure to ensure performance that would impact employees and customers. S ince January 2001 Whole Food Market has experienced increase in sales, profits, and stock prices. The success of the company has flourished from the hard work of team members and strong leadership throughout the company.

Research Essay Example | Topics and Well Written Essays - 250 words - 17

Research - Essay Example As a result of this, real justice calls for people to suffer for the wrongs they have done, and to undergo suffering that is appropriate for the crime they have done. Each criminal is obliged to get what their crime entails and in case of murderer what that crime deserves is death. The sentencing of murderers to death will also make potential murderers to think twice before committing murder. Capital punishment does neither solve nor contribute to reduction of murder crimes. It is just a portrayal of retribution, and as such, is not a morally punishment. This is evidenced by the fact that majority of the people who undergo this punishment are often associated with unintentional commitment of murder crimes (â€Å"Arguments for and Againsts the Death Penalty† 3). For instance, it is evident that majority of the criminals who are convicted of murder do suffer from mental illness. It is also evident that some of the people who are convicted of murder may have committed murder crimes out of uncontrolled emotions. Thus, passing capital punishment to such criminals neither reduces mental illness cases nor controls the emotions of people. â€Å"Arguments for and Againsts the Death Penalty.† Michigan State University and Death Penalty Information Center,(2000): Web. 29 Oct. 2014.

DISCUSSION FOURM 6 Essay Example | Topics and Well Written Essays - 250 words

DISCUSSION FOURM 6 - Essay Example These are normally identified in the early phases of the emergence of a disease, or an epidemiological ailment. The best communication approach is to open a communication line with environmental investigators, during the early phases of the emergence of an epidemic (Monroe, 2011). These communications should be frequent, and the methods used in communicating should be accessible to all. For example, health care experts should use mobile phones and the internet for communicating (Monroe, 2011). Use of mobile phone is an easy method of sharing information between environmental experts and public health officers (Monroe, 2011). It is important to denote that most infectious diseases normally emanate because of poor hygiene and environmental condition. This includes conditions such as contaminated water, poor sewerage system, etc (Monroe, 2011). Liaising with environmentalist will help a health worker to identify the various environmental health hazards, which might be a cause of an infectious disease (Shetty, 2010). Furthermore, there is a need of establishing health hotlines. Mobile hotlines will enable people to communicate directly with health care workers, in case of the emergence of an infectious disease. This is an efficient and easy method of identifying the source of a disease. All that health care workers have to undertake is to inform the public on the existence of the hotline numbers (Monroe,

Liberalism Is Simply Another Tool to Maintain Western Hegemony Essay

Liberalism Is Simply Another Tool to Maintain Western Hegemony. Discuss - Essay Example In the modern world, most peoples’ thinking is dominated by liberal ideas and most political systems especially in the west are founded on and shaped by liberal principles and values (Ramsay, 2004). Liberal democracies ensure the will of the people is reflected in government policies by ensuring free and fair elections with full participation of electorates and minimum intervention in private affairs of citizens. However, liberal theory is accused of masking actual inequalities in power, wealth and abilities of individuals in liberal society. For example, if an individual has the freedom to pursue his interests but has no resources, then the freedom makes no sense. The liberal theory in international politics focuses on achieving lasting peace and cooperation in international relations. The debate surrounding this issue is whether cooperation among sovereign states is possible bearing in mind that each state is rational and utilitarian. Most scholars argue that trade and economic interdependence among nations can lead to cooperation among states (Keohane 1980; Chandler, 2010, Weber, 2010). However, though the interdependence among states brings relative gains to members, it is used as a means to maintain western supremacy over the rest of the world since the west has the resources and power to influence other states especially developing countries. The developing countries consent to the western ideas and incorporate them in their policies due to gains from the cooperation. The essay in trying to answer the question is divided into 3 sections. The first section will deal with defining the key concepts used in the essay as well as the ideas underlying the liberalism theory of international relations. The second section will be to explain how liberalism is used as a tool to maintain western hegemony. The first argument will focus on free trade as a tool to gain consent and maintain western hegemony. This is because most third world countries are lured to accept western liberal values through free trade which guarantees them economic growth. The second argument will focus on international institutions that are used to gain consent through cooperative regimes hence maintain western hegemony. I will also argue how globalization has been used to spread western ideas hence maintain western hegemony. The last section is the conclusion whereby the main points will be highlighted. DEFINING KEY CONCEPTS The liberal theory of international relations is based on various ideas from different liberalists but they all agree on various key ideas. The concepts mostly used in this theory include; liberalism, freedom, equality, justice, rights, public society and private society. Liberalism is derived from the concept of human nature which views individuals as autonomous beings with equal natural rights, intrinsic dignity and equal worth (Ramsay, 2004). Individuals are considered as rational beings able to pursue personal interests and find the best way to satisfy those wants. In this case, public interest does not exist although neoliberals argue that individuals can give up their interests for the good of others since they are impartial. They encourage cooperation among states so as to achieve joint absolute gains for the good of all. Freedom refers to the â€Å"intrinsic dignity and equal worth of each individual† (Ramsay, 2004: 17).It can be negative or positive liberty but negative freedom is more emphasized and entails non- interference. For example, freedom of speech means other individuals should not restrict one

Intentional Torts, Negligence, Nuisance Essay Example for Free

Intentional Torts, Negligence, Nuisance Essay A tort is a legal injury resulting from a violation of a legal right which arises independent of contract and for which restitution may be had in a civil action for damages.   Generally, there are three kinds of torts.   They are:   first, those which are based on fault or negligence; second, intentional torts; and third, those where the element of negligence or intent does not enter as an essential element.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The first kind refers to the fault or negligence of a person who, by his act or omission, causes damage to another, to whom he is not bound by any contractual relation. In some civil law jurisdictions, this tort is popularly known as quasi-delict which is of French origin comprehending a common law concept of negligence. In actions based on quasi-delicts, to recover damages, an injured party must prove the fault or negligence of the defendant, the damage suffered and the relation of cause and effect between the defendant’s negligence and the damage or injury he has suffered. The immediate cause which produces the injury must not be intermitted by any intervening cause.   In cases where both parties are negligent and proximate cause cannot be directly attributed to either party, the humanitarian doctrine provides that the party who had the last chance to avoid the accident but did not do so, shall be held accountable for the consequences of the act. Intentional torts are acts causing injury to persons or property committed with intent to cause damage to another.   This is covered under provisions on human relations.   An example of this type is trespass to land, whether such violation of property right causes improvement or damage to the land.   This is an actual invasion to other person’s possession without consent. A good example of the third kind is nuisance.   This is sometimes classified as intentional tort.   Nuisance is any act, omission, establishment, business, condition of property or anything else which injures or endangers the health or safety of others or annoys or offends the senses or shocks, defies or disregards decency or morality or obstructs or interferes with the free passage of any public highway or street, or any body of water or hinders or impairs the use of property. As to injurious effects, nuisance may be classified as public nuisance or private nuisance. A public nuisance affects a community or neighborhood or any considerable number of persons, while a private nuisance affects only a person or small number of persons.   The remedies against nuisance are abatement brought by an agency of the government and damage suit or relief by injunction by private individuals whose enjoyment of a right has been impaired. In tort cases, the doctrine of res ipsa loquitor is applied.   The doctrine requires that the accident must be of a kind that does not ordinarily happen without defendant’s negligence.   It affords reasonable evidence, in the absence of explanation by the defendant that the accident arose from want of care.   The accident must have been caused by an agency or instrumentality within the exclusive control of the defendant and not due to any voluntary action or contribution on the part of the plaintiff. Strict Liability and Product Liability   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚     Strict liability in tort is a concept where the plaintiff need not prove the negligence of the defendant in order to recover damages caused by defective products. . Consensual contract is not necessary to prove liability of the defendant.   Strict liability is enforced against the manufacturers who are responsible for committing the products in the market.   Liability rests on the protection of the consumers with the aim of securing that the costs of harms brought about by defective products are donned by the manufacturers. In product liability case, the burden of proof is shifted from the plaintiff to the defendant.  Ã‚   The plaintiff must only prove that he suffered injuries by the defective product and that said defect already exists at the time the goods departed from the manufacturer or retailer as distinguished from recovery due to negligence, where the plaintiff has yet to prove that the defect was caused by defendant’s failure to act with prudence. Strict liability applies only where there is physical harm or damage to other property.   Economic loss such as consequential loss of income or cost of repair/replacement brought by defective product is recoverable under the Uniform Commercial Code.   If a product exists different from what is intended by the manufacturer or differs from the same manufacturer’s product, it is said to be defective.   However, the manufacturer is not liable if the injury is caused by unanticipated use or misuse of the product. Wrongful Death and Survival Tort Action   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   When through negligence a person is   killed, wrongful death happens.   Damages may be recovered by the decedent’s survivors or beneficiaries.   Survivors need not prove the exact amount of damages which fall under two classes: economic damages and noneconomic damages. Economic damages include funeral and burial expenses.   If the survivors are receiving financial support, it has to be included, computed based on the life expectancy of the decedent. The value of household services that could have been provided by the decedent to his beneficiaries had he survived shall also form part of the economic damages.   In addition, gifts and other benefits the decedent could have contributed to the survivors shall also be included. Economic benefits shall be reduced to current value.   In deciding for the noneconomic benefits which includes loss and sufferings, no fixed standard exists.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   In survival action for tort, it is the estate of the decedent that can claim for lost earnings, punitive damages and medical expenses incurred by the deceased before to his death.   It means that, it is the successor-in-interest that has the right to file such claim, subject to testate or intestate proceedings under a probate court. Both wrongful death and survival tort action are subject to prescriptive periods under the Statute of Limitations.   Wrongful death has to be claimed within two years from the death of the decedent.  Ã‚   In survival action, the time limit for the action commences from the date the claim actually passed to the deceased.   In deciding these cases, the scale of justice is slightly tilted in favor of the plaintiff where only clear and convincing evidence is required. Immunity, Release and Contribution, Indemnity   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   State political subdivisions such as hospitals enjoy immunity from suits for negligence or intentional torts under state law.   However, under federal preemption law, they may be sued under the EMTALA or Emergency Medical Treatment and Active Labor Act.   Regarding state immunity statute, where a conflict arises between state law and federal law, state law must yield under the supremacy clause of the U.S. Constitution. Under the Communications Decency Act of l996, providers or users of interactive computer service are entitled to immunity.   Legislators also enjoy immunity from suit while in Congress in the exercise of their legislative functions. In personal injury suits, there are cases where there are two or more tort-feasors who are jointly and severally liable for the injury caused to the plaintiff.   Joint tort-feasors are entitled to right of contribution and pro-rata share of the money judgment provided the common liability for damages has been satisfied in full.   The right to contribution is granted only to a tort-feasor who has not willfully caused the injury. Payment by one of the whole liability extinguishes the others and entitles one to recover contributions from the other tort-feasors.   However release of one by the injured party does not necessarily release the other tort-feasors unless provided for in the release, but the claim shall be reduced proportionate to the amount in the release. The party to whom release is granted is exculpated from all liability for contribution to the other co defendants. The proportional degree of fault or negligence of the tort-feasors shall determine their pro-rata share in the liability. However, this issue of proportionate fault should have been litigated and decided in the same action for damages by way of cross-complaint.   In case a defendant has paid the whole obligation or more than his share in the claim; he is entitled to indemnity by filing a cross-claim against a co party.   Where a tort-feasor is entitled to indemnity, the right is for indemnity and not for contribution. Workers’ Compensation, No-Fault Auto Insurance   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Workers’ compensation is an option to the tort system.   Firms self-insure or purchase workers’ compensation insurance as mandated by the state law for the benefit of the workers who sometimes are injured in the performance of their duties.   The insurer pays the worker medical expenses and average wage while under recovery.   The only requirement to avail of this benefit is that the injury must be work-related.   It does not matter whether there is negligence on the part of the employee or employer.   Under this alternative, there is guaranteed income, and because of this, the employee waives his right to sue his employer for work-related injuries sustained.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The problems of long and costly court cases to determine who is at fault led to the enactment of the no-fault auto insurance laws that provide for the payment of policy holders irrespective of fault and also limits the right to sue. This is known as personal injury protection or PIP first party coverage. This is also an alternative to the tort system.   Motorists are allowed to sue only under certain thresholds involving grimness of injury.   The law intends to reduce vehicular accidents cases clogging the courts, limiting payment for losses and restricting recovery for non-economic damages thus, reducing premiums on auto insurance. Defamation, Injurious Falsehood, Invasion of Privacy Defamation is one of the dignitary torts which refers to the issuing or publishing of a false statement to a third party about another person, resulting to another person’s injured reputation which entitles him to damages. Defamation in print is called libel.   Oral or spoken defamation is slander. To have one’s reputation remain untarnished is one of the rights of a person under the civil law system. The burden of proof lies with the defendant to prove his innocence.   The plaintiff does not need to prove intent to besmirch his reputation and the actual damage suffered. However, the requirement to prove damage is not totally abstracted in all slander cases.   The Ontario Libel and Slander Act of Canada still requires proof of damage in cases where the damaged reputation of the plaintiff resulted to loss of business contract.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   The tort of injurious falsehood or slander of goods applies where a person’s goods are discredited resulting to economic loss, usually made by dissatisfied customers or dismissed employees.   Monetary loss must to be proved to obtain recovery for damages.   The elements for this tort are: a statement about the goods; that there is falsity in the statement which was published maliciously and that the plaintiff suffered damages. To establish slander of goods, the statement must cause a reasonable person to believe that the statement is true.   The defendant need not mention the product or name of the plaintiff to be liable.   It is enough that an implication be drawn by the public that the defendant’s derogatory statement refers to the goods in issue where for example there is only but two products of same sort in the industry.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Invasion of privacy is another form of dignitary tort.   This is a right also protected by the Constitution under the Fourth Amendment, for a person to be left alone by himself free from interference or abuses of the government.   This includes the right to property against unreasonable search and seizure.   Invasion of property by private individuals is dealt with under private tort law. Four categories are set forth under this tort.   One is intrusion of solitude which arises when a person presents or displays another to unjustifiable promotional material or publicity. Another category is public disclosure which is revealing of private information though conforming to truth is appalling to a sensible person.   The third category is false light which places another person before the public in a false light through misrepresentation of a person’s character, beliefs and activities and the last of the categories is appropriation which involves using the person’s identity or visual representation without his consent for the benefit of another person.   Invasion of privacy entitles an injured person to compensatory damages and punitive justice. Misrepresentation   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Any averment or expression conducted in any manner that is not in accord with facts is misrepresentation.   It is a civil wrong and creates civil liability if monetary loss ensues.   A person making misrepresentation to be held liable, the misrepresentation must be relied upon by the recipient or taker of the falsified statement and the maker knew of such fact. Misrepresentation creates liability whether committed intentionally or unintentionally. In a contract, misrepresentation bestows a person a valid ground for the rescission of contract.   An insurance policy contract may be cancelled due to material misrepresentation made by the insured or the insurer may refuse a claim.   An opinion that is not a true statement is not a misrepresentation of fact.   However a promise which the maker has no intention of carrying out that induces another person to enter into an agreement is an actionable tort. Interference with Economic Relations   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Interference with economic relations is an economic tort the purpose of which is to protect people from intervention with their commercial or business relations thus maintaining contractual stability.   It has been held in a number of cases that an accomplice or accessory to breach an existing contract is liable for economic loss sustained by a party to the contract. In an action for interference with economic relations, it is necessary that the plaintiff must prove the existence of a contractual relation between him and a third party; that the defendant has knowledge of such contractual relation; and that defendant intentionally, with malice did disturbed said contractual relation. Damage must be proved, but it is presumed when it is a direct consequence of the disturbance and ultimately the breach of contract. Interference may include also inducement or persuasion to a person not to continue with a prospective business relation or preventing a party not to enter such a relation.   Interference with a pre-contractual business relation is however considered lawful unless wrongful means are employed.   Several factors have to be looked into in deciding impropriety of the means used to interfere. One of these is the motive of the party interfering.   Another consideration is the interest of the parties involved in the unlawful interference. To determine whether interference is proper, industrial ethics and practices are substantively necessary. The interference or economic tort does not only protect contractual interest but also ethical and legal interest thus upholding contract as a legal instrument in promoting trade and competition. Unjustifiable Litigation   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Unjustifiable Litigation also commonly known as malicious prosecution, an intentional tort has been securely instituted in law. An action for malicious prosecution is a remedy for recovery used by victims injured by unwarranted judicial proceedings.   The underlying principle of this tort is an effort to equalize conflicting interests.   Plaintiffs have the right to access to courts without concern of inculpation. Public policy requires that defendant’s interest be also protected against unmeritorious litigations through this remediation. Sometimes people, prompted with malice come to court even without probable cause only to harass other people.   In a cause of action for malicious prosecution, the plaintiff must establish that the prior action was filed at the behest of the defendant and that it was terminated in his (plaintiff) favor; that it was initiated without probable cause and was brought with malice. However, malicious prosecution cases filed on the basis of absence of probable cause usually do not lie or prosper because it is for the court to determine the existence of probable cause as it is a legal question.   Legal authorities said that malicious prosecution deters claimants to institute criminal proceedings for fear of facing excessive litigation after the initial action has been decided not in their favor. In a case, the Supreme Court settled that it is not sensible to desert or loosen the restrictions on malicious prosecution (Sheldon v. AO). Reference Supreme Court of California (l989, January 12). Sheldon Appel Co. v. Albert Oliker, Cite as: 47 Cal.3d 863, 765 P.2d 498, 254 Cal.Rptr. 336.   Retrieved on September 16, 2007 from http://www.casp.net/oliker-1.html

Tribological audit on Gears

Tribological audit on Gears Tribology has been there since the beginning of recorded history. Tribology is the word basically derived from Greek in which ‘tribos means rubbing. From this we understand that â€Å"Tribology is the scientific study of interacting surfaces and of related subjects and practices†. [1] The 3 factors that are considered to be a major factor in tribology are friction, wear and lubrication. Friction is defined as the opposite force created when 2 surfaces are in contact. Friction can cause damage to the parts in contacts due to the heat generation and this can be studied using tribology. Wear is defined as the irregularities caused in a surface due to the external factors. Running a machine with weared parts can reduce the life of the machine. Lubrication is defined as the viscous liquid applied between two surfaces in contact for better performance and longer life. Untitled.jpg Gears are means by which power is transferred from the source to the application. [2] In the present world it has been used in most of the mechanical machines so that power can be transferred in an easier and sufficient way. The gearing technology started at about 100 years before and it was carried out by the Europeans in the ‘Dark Ages to bring out the development in the gears. [2] As years passed by more developed versions of gears were introduced which were lightweight, with high speed and gears that could withstand high loads. The gears are used as an important component in automobiles so that power is transmitted from the engine to the wheels to cause an increase in the speed of the vehicle. Hypoid gears are one of the common gears used in automobiles to do this operation. [2] Transmission which is defined as two or more gears working in tandem is used as an important principle in automobiles. In todays world many gears have been developed and these gears are being used for different purposes. These gears have been been divided into 2 such as: External Gears: In these types of gears the teeth can be found outside the cylinder or cone. Internal Gears: These types of gears have teeths in the inner surface of the cylinder or cone. Spur GearsWith either internal or external gears a lot of gears have been developed for different purposes and these gears are explained below: a) Spur gears: This is one of the most common types of gear. These gears have teeth perpendicular to the face of the gear and the edge of the tooth is parallel to the axis of rotation. The disadvantage of these types of gears is that they are a little noisy at low speeds and this reduces to a minimum at higher speeds. [7] b) Rack and pinion gears: This type of gears consists of a rack more like a spur gear with infinite radius of curvature and a pinion gear which keeps on rotating over the rack. These types of gears are mainly used to convert circular motion into linear motion. Trains run on railway tracks based on this principle. Racks Gears c) Helical gears: Helical gears are almost similar to the spur gears. The difference is that the teeths are in a helicoids shape and are not parallel to the axis of rotation. [7] It is less noisy than the spur gears and is widely used in industries. [7] Double helical gears are also used which has helical gears kept inversely on both sides. Helical Gears d) Worm gears: These are the type of gears that consists of a concave teeth profile and this teeth is usually engaged to helical gears. It is used where power is to be transferred at 90 degrees. Here sliding motion is caused rather than helical motion. [7] Heavy lubricants with good film thickness is used to prevent contact of the metals because since the teeth is small there is a chance in breakage of the teeth causing higher maintenance of the gears. Worm Gears e) Bevel gears: These types of gears have conical shaped teeths. It is mainly used to connect shafts to intersecting lines. The angle between 2 bevel gears can be between 0 to 180 degrees depending upon the purpose. Bevel gears with equal number of teeths and shafts at 90 degrees are called miter gears. Spiral bevel gears also known as hypoid gears are used in automobiles. These gears will always have shafts at 90 degrees. Bevel Gears f) Epicyclic gears: Here 2 or more external gears move inside an internal gear as shown in Fig. 8. These types of gears are mainly used in mechanical differentials. In all the types of gears above due to their contact with each other a frictional force is created between them and due to these frictional forces it can cause wear to the gears. Here the tribological factors come into play and reduce the life cycle of the gears. This can also cause the tooth of the gears to break. So lubricants have to be used to an extent to improve the life of the gears and materials have to be used according to the kind of environment in which the gears are to be used. Materials used for making Gears: Gears can be made from a wide variety of materials such as wood to high steel alloys depending on the requirements. Gears in different mechanical machines needs different materials to overcome the surrounding obstacles, for longer life of the equipment and the machine and also to reduce the cost. Due to these the design of gears will always depend on the accuracy level needed for the gears, load to be applied on the gears, speeds to which the gears will rotate, the noise limitations and the material to be used. So the cost of the gear will always depend on these factors. [2] So while selecting materials we should consider the tribological factors that would affect the gear while its operation like: * Allowable bending and Hertz stress because as the bending stress is low there is a chance for the gear to get bend at higher temperatures. * Wear resistance as the gears and gear tooths should not get weared at higher speed of rotation of the gears. * Impact strength as the gears should not break when it is engaged with higher force with another gear. * Water and corrosion resistance to resist against corrosion due to lubricant action. * Manufacturing cost to make the gears profitable * Size and weight so that the gears can be used in all machines * Lubricant requirements to see that costly lubricants are not required to maintain the gears. * Dimensionally stable and reliable. * Stress free structure [3] Depending upon these factors, different materials are used and the details about properties of the materials and the conditions on which these materials are used are given below: 1) Plastics: In the past, gears were made of wood or phenolic-resin impregnated cloth and as years passed by more light weight, low cost gears were required. With the invention of new polymers in plastics it gave more opportunities for the preparation of light weight, low cost gears. For this the most common plastics used today are acetate and nylon resins. This plastic gear reduces the cost of the gears when produced at large quantities and also is sometimes mixed with metals for longer and quieter operation of the gears. But since these acetate and nylon resins gears are limited to certain conditions such as strength, temperature resistance and accuracy it was required to make a different polymer for the preparation of the gears and a different polymer called ‘Polyamide was developed. This polyamide molded gears could resist higher temperatures and could be used in certain situations in place of metal gears to overcome the tribological factors but due to its higher cost for p roduction its still not used in all situations. [2] 2) Non-ferrous alloys: Titanium is also another material that can be combined with other metals to form a gear. Also the die cast materials like zinc, aluminium, brass, bronze are also used for gears due to its high corrosion property, high strength, less machining. These non ferrous alloys can be used for making gears because it can overcome most of the tribological factors. But these metals cannot be produced at large quantities due to its high cost of production. [2] 3) Cast iron: Cast iron is used for the preparation of gears because of its low cost, machinability and moderate mechanical properties. There are 3 types of cast irons differentiated basically depending on the structure of graphite in these irons. These are gray iron, malleable iron and ductile iron. Out of these the malleable and ductile irons have good shock resisting property and are mostly used in most of the gears by mixing it with other metals so that the gear made from this will be able to overcome most of the external factors affecting tribology. [2] 4) Sintered Powder Metals: These metals are used where high production is required with low cost. The process is simple where powder is put into the suitable high pressure die. A wide variety of selections of powders are available in this section of powdered metals. This sintered powder is also widely used in automotive industries by hot forming process which was recently developed to improve the mechanical properties of gears and resist against the effects of tribology. [2] 5) Hardened steels: This is one the most commonly used material in all industries for the manufacture of gears. These types of materials are used based on the factors like load, time period for which the material will work, lubricants to be used and the surrounding conditions that affect tribology such as temperature, pressure and humidity. When the gears are to be run at moderate temperature a low alloy material will be used for the production of gear and if the work load on the gear is to be high a high alloy material will be used after case carburizing or case nitriding to increase the fatigue strength. Of the 2 processes the case carburizing will have more distortion than the case nitriding process and would require an additional grinding process that would cause an increase in the cost of the gears. [2] Steel alloy is mostly used for the production gears more than normal steels. The materials used for gear preparation are an important factor for the preparation of gears as the working, the life of the gear, strength of the gear will all depend on the material. The material chosen must also be able to withstand the friction, wear and lubrication and have to be overcome to have long lasting and strong gears. If correct material is not chosen according to the criteria the machine can be of a complete failure and may not work properly. While selecting the materials the following factors have to be considered: Surface of the gears: The surface of gear has an important part in the life cycle of the gear as it must be able to withstand friction, wear and it must be able to properly engage with other gears and provide the required power to the required output shaft. For gears the surface texture which is defined as â€Å"the combinations of imperfections on a surface† [11] must be smooth and the gap between two teeths must be of proper size so the the 2 teeths are engaged correctly to each other. Eventhough gears now produced are with poor geometrical perfection or quality of surface texture companies is trying hard to produce gears with reduced surface texture by processes such as honing, lapping and super finishing methods. This is the opposite force caused when one body moves tangentially over another. The force can cause heat between the surface and can lead to the wear of the parts. The quality of the material used and the surface roughness decides the amount of friction that would occur on the surface of gears and this inturn decides the depth of wear that would occur on gears.The different types of wears that occurs on the surface of gears are given below: Ø Adhesive wear: This type of wear occurs on the tooth surface and is very difficult to find. Here the surface of the tooth gets a quashed look due to the long running of the gears. A moderate adhesive wear can also be caused on the gear surface due to variable loading of on the gear at different times. [15] The moderate adhesive wear will appear bright and can be seen with the naked eye 9as shown in fig. 11). Ø Abrasive wear: This type of wear occurs on gear surfaces when fine or severe dust particles are present in the lubricant used to reduce friction between the engaging gear surfaces. This type of wear is mainly seen in machines used at cement factories, road laying machines, mining machineries etc. The abrasives can cause the surface texture of the gear to change which in turn causes the application of more lubricant to the surface for the smooth running of the machine. [15] The abrasives in the lubricant can be of 2 types and cause wear to the gear in 2 methods which are classified as mild abrasion and severe abrasion.  · Mild Abrasion: This type of wear is caused when mild or fine particles are present in the lubricant and this causes wear on the surface of the gear. This cause only small marks on the surface of the gear and wear increases in the longer run of the gears. [15]  · Severe Abrasion: This type of wear is caused when large particles are present in the lubricant. It causes a larger wear in the gear and also can cause the breakdown in the machine. [15]  · Corrosive Abrasion: This type of abrasion is caused when the chemicals in Lubricating oil reacts with the surface. [15] Conformity: It is defined as â€Å"the degree of agreement between the surfaces†.[1] The degree of conformity must be maximum for gears to exactly engage and run for a longer period of time. Initial wear can increase the conformity between the gears. If the right amount of lubricant is added during the initial wear period the initial wear will stop by itself and increase the conformity between the gears. High conformity is found mostly between 2 flat surfaces. The lowest conformity is found between a flat surface and a ball.[1] Surface Texture: It is surface condition that depends on the material of manufacture, the way in which the material was processed, the lubricant used on the surface and the type of wear that occurs on the surface. Surface texture is an important factor for gears movement of the gears and the degree at which the gears touch each other depends on this property. Below the shows the terms that are used for defining the surface texture: The irregularities in the surface of gears must be reduced to minimum while making a gear so that the thin film lubricant can run smoothly between gears and reduce the tribological factors between the gears. The surface finish should be smooth and must be free from sharp irregularities to increase the fatigue strength of the gear and this should be maintained throughout the gears to have a quieter operation. [3] The surface of the gear which is to be in contact with the other gear has to be of higher strength so the tooth dont get weared out easily. The precision of the gears structure should be considered for long lasting of the gears. The surface of the gears can be improved using methods like polishing, heat treatment methods, Lubrication for smoother operation of gears: Lubricants are a viscous fluid applied between 2 gears for reducing the heat generated between them and to lubricate the teeth to reduce the friction between the gears. The selections of lubricant have to be correct to in order to provide high efficiency, good reliability, low maintenance and long life for the gears. [4] Generally the gear operates in 3 modes of lubrication mainly boundary, mixed, full film and hydrodynamic lubrication. The boundary condition is attained when the gear is started or stopped. With increase in relative motion the mixed lubrication condition is obtained and with further increase in speed the gear is said to run at full film lubrication.[3] â€Å"If there is a lubricant between the 2 contact surfaces and it is sufficient to protect the gears from contact then the lubrication is called as hydrodynamic lubrication†. [1] The lubricant differs from the normal liquid by the property of viscosity. Viscosity is defined as â€Å"the measure of the fluids resistance to flow†. [13] Since gears would be under high pressure and sliding it would require a medium to high grade lubricant. As the viscosity of lubricant increases the lubricant is said to be more reliable for the gears. A gear lubricant is said to have the below factors for obtaining a good performance from the gear: * thermal and oxidative stability * thermal durability * compatibility with seal materials * protection against excessive gear and bearing wear * high-temperature extreme pressure protection * gear and bearing cleanliness * emulsibility characteristics * rust and corrosion protection, especially to yellow metal components * antifoaming characteristics [5] The major tribological factors of the lubricant are:  · Viscosity: It is a property of the lubricant for providing the lubrication affect to the engaging gears. The viscosity of the lubricant can protect the gear from friction. Higher the viscosity greater the protection to the gears.  · Additives: It is a chemical substance added to oil to increase the property of oil and protect the gear against wear. Additives can protect the gear from wear and overheating. Better the additives greater will be the protection for the gear.  · Contamination: It is the addition of an external component in the lubricant that could reduce the property of the lubricant. This is a disadvantage for gears. If the contaminated substance is large it can cause a breakdown to the gears.  · Degradation: It is the wearing out of some parts of the gear due to chemical reactions. This is also a disadvantage to the gears. More the degradation more the chance for the tooth to break off. The below table explains the factors affecting selection of industrial gear lubricants: Factor Requirement Gearing Type * Spur and bevel * Helical and spiral bevel * Hypoid * Worm Low slide, low speed Moderate slide, moderate to high loading High slide, high loading Excessive sliding,moderate to high loading Loading High loaded industrial gear drives requires the use of extreme gear pressure gear lubricants. Surface finish Rougher surfaces requires high viscosity oils Smoother surfaces can use low viscosity oils Transmitted power As load is increased viscosity must be increased. Gear speed The higher the speed of the gear drive the lighter the viscosity needs to be Materials compatibility Some types of extreme pressure additives can attack yellow metals like brass and bronze Temperature The industrial gear lubricants viscosity must be selected based on the lowest and highest operating temperature. Types of gear lubricants: There are lots of oil used as lubricant for gears to reduce wear,to protect against corrosion, to protect the gear against oxidation and to prevent the formation of foam between the 2 gears. [12]  · Inhibited oil: This is a lubricant used to prevent the corrosion and foaming between the gears. [12]  · Extreme Pressure Oils: These oils contain inhibited oils and chemically active substances and are used for modifying the friction acting between the 2 engaging gears.[12]  · Compounded oils; These are oils made from steam cylinder stocks compounded with fatless additives. The purpose of this oil is also to reduce friction.[12]  · Open gear compounds: This lubricant consists of additives and is used for high, slow speed heavily loaded gears. This lubricant protects the gear teeth from damage.[12]  · Greases: This is one of the commonly used lubricants. It consists thick soap contents. It can only be used on low speed gear surfaces.[12] Methods of lubrication:  · Grease Lubrication: This type of lubrication is used at gears with0 to 6 m/s tangential speed. It can be applied on all types of gears operating at low speeds. Excess of this lubricant can lead power loss and viscous drag.[5]  · Splash Lubrication: This type of lubrication is applied to gears with speed of 4 to 15 m/s tangential speed. Here the lubrication is done by running the gear through an oil bath. The lubricant is effective only from 3 m/s speed of the gear and the oil should be prevented from mixing with some other liquid or particles which could cause a damage to the gear teeth.[5]  · Spray Lubrication: This type of lubrication is applied to gears with more 12m/s of tangential operating speed. Here the oil for lubrication is sprayed through a nozzle. The nozzle should be engineered properly as there is a chance for the oil to get deflected out of path of flow by centrifugal force or by the air that is flowing out. [5] Lubricants can protect the gears from the tribological factors such as friction and wear. We know what are the types of lubricants to be used, their applications and the types of lubrication processes. It is important that we select the right amount and quality of lubricants for the gears so that they have a longer life and dont get weared out easily. Engineers are still now researching to find the best lubricant for gears so that defects in gears like scoring, scuffing, pitting doesnt occur at all for gears. The gear noise is also prevented to an extend by lubrication. Operating Conditions for Gears: Operating conditions are important tribological factors for gears as this will determine the lubricant to be used, the material to be selected for making gears. The operating conditions of gears are determined by the factors like load applied on the gear, the speed at which the gear is about to rotate,relative motion between the gears, environmental condition, the product of pressure and velocity acting on the gears and the temperature on which the gear is about to work. These operating conditions which are to be considered for operation of gear are applied below: 1) Load: Load is the determining factor for the strength of a gear which determines the material to be used for the gear production, the amount of rubbing that would occur between the gear surfaces, the whole network of surface stresses that would occur in the contact zone of the gear surfaces and the coefficient of friction that would occur between the gears. The load also influences the behaviour of a lubricant or the abrasive particles present in the lubricant which would cause an impact on the gear tooth directly. The other area where the load influence is known is at the bonding between the gears that is directly dependent on the degradation of the surface films, increase in contact area and on temperature. In fact loading has a major impact on the change, age and wear characteristics of the materials. The schematic diagram of the influence of load on the operation of gear is given in the fig. 11.the explains the stresses produced due to load applied and the effects of these sub stances on the element.So in order to keep the gear in good condition and free from wear the following points have to be taken into account: * To keep the gears in good condition progressive loading of gears is a best way. * Decrease in load variation as it would reduce the rise of cavitation in the gears * Decreasing fatigue loading in gears to prevent surface fatigue wear.[14] 2) Speed: Speed of gear is an important factor as it varies from one mechanical component to another and is an important factor for the working of the machine. The parameter of the gears that are greatly influenced by the speed of gears are : a) Temperature: Temperature is a factor which is greatly influenced by the speed of the gear. As the speed of the gears increases the temperature between the gears also increases leading to more heat dissipation. Inorder to maintain the temperature between the gears we have to consider a good coolant and a good heat conducting surrounding medium. b) Friction coefficient: The effect of speed on the friction coefficient comes into play especially in a lubricated circumstance, where this factor determines the hydrodynamic load carrying capacity. At very low speed of the gears there is a chance for the stick-slip phenomenon due to the fluctuation in friction coefficient. [14] 3) Relative motion: The relative motion involves motions like sliding, rolling, spinning and bouncing. These motion can decrease the performance of the gear and also can cause wear in the gear. The use of correct material, lubricant and designing the gear correctly can increase the performance of the gear and also give longer life to the gear. [1] 4) Environment: Environment can cause a decrease in performance of the gear. This is caused by the contamination of the lubricant and also due to the chemical reaction of the lubricant with the gear metals. [1] 5) Product (PxV): Here the quantity of heat generated by friction is calculated from the energy at the contact which is given by the equation E = QVf (where Q = load applied to the contact, V = displacement velocity, f = friction coefficient). Here the term PxV is used as a reference to estimate the limiting conditions for materials such as polymers, solid lubricants, self lubricating sintered materials etc. This in turn can be used as a basis for the selection and comparison of materials. Thus we are able to know the maximum PxV for certain materials and us them for the production of gears. [14] 6) Temperature: Temperature has a major effect on the contact zone of the 2 surfaces of a gear. The temperature increase in the tooth of the gear can cause geometric distortion or loss of clearance in the tooth. It can also cause an increase in the coefficient of friction and wear to the gear. Temperature can also cause deterioration in the mechanical properties of the materials and change the properties of the lubricants. An increase in the interfacial bonds is also caused which lead to a chemical reaction between the materials. [14] Conclusion: Thus the audit of gears using the tribological factors such as material, surface, lubrication and operating conditions was conducted. It is found that gears are useful in most of the mechanical applications and also have a lot of properties that are to be taken care of while the operation of the gear. In todays world, a lot of materials are available for the manufacture of gears. These materials can only be used in different conditions and have their own advantages and disadvantages. So in future a much modern material with zero wearing property and that provides longer life to the gears have to be developed. In the case of surfaces of gears smooth finished gears are already been produced these days. A surface with normal surface texture and conformity will provide smoother running of gears in future. A lots of lubricants are available in todays world. In future a more advanced lubricant can be developed that can reduce wearing of gears completely and also help to increas e the performance of gears to the fullest. All gears today are developed for performing at a particular load and temperature above which the gear can get damaged. So in future gears have to be developed that can operate at maximum temperature and load so that wear of gears due to these characteristics can be reduced to minimum. References: [1] J.A. Williams, Oxford Science Publications, OUP, 1994, pp.1. [2] Coy, J.J., Townsend, P.D. and Zaretsky, E.V., â€Å"Gearing†, NASA RP-1152, December 1985. [3] Gear Materials, Ashoka Group [online].[Accessed on 6th December,2009]. Available from: http://www.gearshub.com/gear-materials.html#selection [4] Gearology, Boston Gear [online].[Accessed on 2nd December,2009]. Available from: http://www.bostongear.com/training/gearology.asp [5] Gear Lubrication [online].[Accessed on 4thDecember,2009]. Available from: http://www.roymech.co.uk/Useful_Tables/Drive/Gear_lubrication.html [6] Lawrence G. Ludwig, Jr., Schaeffer Manufacturing Company, Lubrication Selection for Enclosed Gear Drives.Machinery Lubrication. January 2005 [7] Gear Types, Engineers Edge [online].[Accessed on 4th December,2009]. Available from: http://www.engineersedge.com/gears/gear_types.htm [8] Precision Gears,Inc [online]. [Accessed on 4th December,2009]. Available from: www.precisiongears.com [9] Gears,Monarch Bearing [online]. [Accessed on 4th December,2009]. Available from: http://www.monarchbearing.com/gears.html [10] Surface Finish [online].[Accessed on 6th December,2009].Available from: http://www.mfg.mtu.edu/cyberman/quality/sfinish/index.html [11] Surface Texture –Definition [online].[Accessed on 6th December,2009].Available from: http://www.toolingu.com/definition-350140-22499-surface-texture.html [12] Gear Systems – A Tribological Review [ online].[Accessed on 6th December,2009]. Available from: http://www.chunbotech.co.kr/techinform/ti-13.pdf [13] Viscosity [online].[Accessed on 6th December,2009].Available from: http://www.princeton.edu/~gasdyn/Research/T-C_Research_Folder/Viscosity_def.html [14] Neale.M.J, Polak.T.A., Priest.M, â€Å"Handbook of Surface Treatments and Coatings†, Professional engineering Publishing Limited London and Bury St Edmunds,UK,2003,pp. 24-27. [15] Gear Failures[online].[Accessed on 6th December,2009]. Available from: http://www.nptel.iitm.ac.in/courses/IIT-MADRAS/Machine_Design_II/pdf/2_7.pdf